2. Home
  3. ARCHIVE
  4. 2018
  5. VOL 40, NO 2 (2018)
  6. Архив номеров
  7. 2012 год
  8. 34-5
  9. Modeling of Resistance of Granulated Current-Conducting Mediums by Parametric Dependences

Modeling of Resistance of Granulated Current-Conducting Mediums by Parametric Dependences

ZAKHARCHENKO S.N., SHIDLOVSKAYA N.A.

ABSTRACT

The model of equivalent electric resistance of the granulated current-conducting mediums at their spark-erosional processing has been created on the basis of experimental data and analysis of physical processes in such mediums. The offered model considers the phases of occurrence, de¬velopment and fading of spark channels which, in turn, are caused by dynamics of generation and recombination of free charge carriers in them.imization of distribution networks reliability, which are most suitable for the domestic power companies.

KEYWORDS

Electricalresistance, granular conductive medium spark channels parametric model.

REFERENCES

  1. Shcherba, A.A., Podoltsev, A.D. and  Zakharchenko, S.N. (2001), “Regulation of the dynamic parameters of the technological systems of bulk electric-conductive processing heterogeneous environments”,  Pratsi Kyiv Instytutu elektrodynamiky NANU. Elektrotekhnika 2001,  pp. 3-16.
  2. Shcherba, A.A., Zakharchenko, S.N., Lopatko, K.G. and  Aftandilyants, E.G. (2009), “The use of bulk electric-dispersion for sedimentation stability of biologically active metal hydrosols”, Zbirnyk naukovykh prats Kyiv IED NANU, no.  22, pp. 74-79.
  3. Shcherba, A.A., Zakharchenko, S.N., Yatsyuk, S.A. and et al. (2008), “Development  of systems for receiving ultra dispersed powders intrinsically erosion: influence of vibration on the parameters of discharge pulses and the characteristics of the products”, Tekhnichna elektrodynamika. Tematychnyy vyp. Problemy suchasnoyi elektrotekhniky, Part 4, pp. 107-112.
  4. Shcherba, A.A., Zakharchenko, S.N., Yatsyuk, S.A. and  et al. (2008), “Analysis of methods for increasing the efficiency of electro coagulation erosion in the purification of aqueous media”,  Tekhnichna elektrodynamika. Tematychnyy vyp. Sylova elektronika ta enerhoefektyvnist, Part 2,  pp. 120-125.
  5. Muratov, V.A. (1986), “Semiconductor converters for power processing units electro erosion dispersion”,  Dissertation of Cand. Sci. (Tehn.), Kiev.
  6. Zakharchenko, S.N. and  Fastova, S.S. (2010), “Approximation time dependences of voltage and current discharge pulses in granular conductive media for rapid determination of their equivalent resistance and power pulses”, Tekhnichna elektrodynamika. Tematychnyy vyp. Sylova elektronika ta enerhoefektyvnist, Part 2, pp. 87-90.
  7. Shidlovskiy, A.K. and  Suprunovskaya, N.I. (2010),  “Energy processes in electrical circuits running the pulsed capacitive energy storage by limiting the duration of its discharge on the electric spark, and non-zero load conditions of its charge”, Tekhnichna elektrodynamika, no.  1, pp. 42-48.
  8. Podoltsev, A.D. and  Suprunovskaya, N.I. (2006), “Modeling and analysis of electric discharge processes in nonlinear RLC circuit”,  Tekhnichna elektrodynamika. Tematychnyy vyp. «Problemy suchasnoyi elektrotekhniky», Part 4, pp. 3-8.
  9. Zakharchenko, S.N., Chibelis, V.I. and  Burlaka, V.P. (2009), “Modeling the transition process in the discharge circuit processing unit volume of electric-dispersing metal pellets”,  Dopovid za materialamy MNTK MUAS «Suchasni problemy elektroenerhotekhniky ta avtomatyky» [Report on materials IRTC MUAS "Modern Problems of Electric Power and Automation"],  Politekhnika,  Vol. 2, pp. 386-389.
  10. Filippov, E. (1968), Nelineynaya elektrotekhnika [Nonlinear Electrical Engineering], Energiya, Moscow, Russia.
  11. Bozhko, O.Ye.,  Tarelin, A.O.,  Fedorov, O.I. and et al. (2005),  Patent  Ukraine no. 72 324, MPK V22F 9 / 14,1 / 02 “Installation for electrical dispersion of metals”,  publication date February 15, 2005; Bulletin  no. 2.
  12. Fominskiy,  L.P.  (1979),   AS  no. 663 515 SSSR, MPK V23R1/02  “Arrangement for electro erosion dispersion of metals”,   publication date  May 25, 1979;  Bulletin  no. 19.
  13. Fominskiy, L.P. (1993),   Patent no. 2001719 RF, MPK V22R9/14 “A device for electro erosion dispersing metals in bulk layer”,  publication date  October 30, 1993; Bulletin  no. 39-40.
  14. Lopatko, K.G.,  Aftandilyants, Ye.G. ,  Shcherba, A.A. and  et al. (2009),     Patent Ukraine  no.  38461, MPK (2006) B22F 9/08.  “Device for ultra dispersed colloidal solutions of metal powders”, publication date January 12, 2009; Bulletin no. 1.
  15. Shcherba, A.A., Zakharchenko, S.M. and Spinul, L.Yu. (2010),  “Patterns of change in electrical resistance layer aluminum granules at their spark dispersion”, Zbirnyk naukovykh prats  In-tu elektrodynamiky NAN Ukrayiny, no.  25, pp. 133-139.
  16. Shcherba, A.A., Zakharchenko, S.N., Suprunovskaya, N.I. and  Shevchenko, N.I. (2006), “The influence of repetition rate of discharge pulses on electrical resistance of current-conducting granular layer during its electric-spark treatment”, Tekhnichna elektrodynamika , no.  2, pp. 10-14.
  17. Zakharchenko, S.M., Shevchenko, S.M.,  Peregynyak, S.M. and  Fastova, S.S. (2010), “Complex remote control parameters of the bulk electric spark processing heterogeneous environments conductive in real time”, Naukovyy visnyk Natsionalnogo universytetu bioresursiv i pryrodokorystuvannya Ukrayiny  Kyiv,  Vol. 148, pp. 162-167.
  18. Rayzer, Yu.P. (1987), Fizika gazovogo razryada. Uchebnoye rukovodstvo  [Physics of gas discharge. Tutorial], Nauka, Moscow, Russia.
  19. Akishev, Yu.S., Afonin, G.I., Grushin, M.E. and et al. (2007), “On the development of the spark in nitrogen, supports charging of the parasitic capacitance of the external circuit”,  Fizika plazmy, Vol.  33, no. 7, pp. 642-660.

Full text: PDF (in Russian)